############################################################ ATACT Started -- Thu Sep 11 08:06:41 2003 ATACT -- ATA Command Test -- Version 3C -- using ATADRVR Version 15C. Copyright 1997-2003 by Hale Landis. All rights reserved. Visit www.ata-atapi.com for current ATA/ATAPI information. This copy purchased by Hale Landis. Command line: A:\ATACT.EXE p0 pcidev=0:31:1 dma=pci time=9999 nopm seq=wrn Options in effect... Log file name is '.\ATACT.LOG'. Testing primary device 0. CACHE, Set Features will be used to turn R/W caching on/off. COMPARE=FULL, Full data compare. DMA, Read/Write DMA commands will use PCI BusMastering DMA. IDP=NORMAL, Init Device Param will use 1-16 heads and 1-63 sectors. INTerrupt, IRQ number will be determined during host adapter setup. NOLLT, Error messages will not include low level trace. NOPM, Power management commands will not be used. NOSTOP, An error will not stop the program. PCIDEV=0:31:1, bus:device:function for the PCI host adapter. PIO=WORD, PIO data transfer will use 16-bit instructions. SEQ=WRn, Write and/or read pass before normal operation. SLOW=NONE, No slow data transfer on PIO Data In/Out commands. SM=NORMAL, Set Multiple will use powers of 2. TIME=9999, Run time will be 166 hours 39 minutes. WRITEREAD, Write and read commands will be used. The I/O buffer is 262144 bytes or 512 sectors of 512 bytes each. PCIDEV or DMA=PCI option in effect, locating the PCI bus ATA host adapters ... (scanning PCI bus 0) PCIDEV= Vendor Device Class -- Primary -- -- Secondary -- b:d:f ID ID Code Cmd Base Ctrl Base Cmd Base Ctrl Base 0:31: 1 8086 24DB 0101 00000001 00000001 00000001 00000001 (scanning PCI bus 1) (scanning PCI bus 2) (scanning PCI bus 3) Found 1 PCI bus ATA host adapters. * PCI bus 0 device 31 function 1 (PCIDEV=0:31:1) was selected. * PCI configuration data for this device: +0000 86 80 db 24 05 00 88 02 02 8a 01 01 00 00 00 00 +0010 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 +0020 01 fc 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 +0030 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 +0040 07 a3 00 80 00 00 00 00 01 00 02 00 00 00 00 00 +0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0060 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 +0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00f0 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 * Using the primary side of this PCI bus ATA host adapter. * ATA Command/Control Blocks are at I/O addresses 01F0H:03F0H. * Bus Master Control Registers (BMCR) * are at I/O address FC00H. Contents of the BMCR for the Primary: +0000 00 00 20 00 28 fd 09 00 ... done. Setting up ATA/ATAPI driver ... Using Primary I/O base addresses 01F0H:03F6H. Using interrupt mode with IRQ 14. ... done. Checking host adapter configuration ... Device 0 type: ATA device. Device 1 type: Unknown device type. ... done. Setting up PCI DMA ... PCI Bus Mastering DMA setup. * NOTE: Device(s) DMA configuration (and mode) must match the host adapter's DMA configuration (and mode). ... done. Checking device 0 configuration ... Device 0 is an ATA device. Device Model: 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx' Device Serial: 'xxxxxxxxxxxxxxxxxxxx' Firmware Ver: 'xxxxxxxx' Total LBA28: 19746720 12D4FA0H (LBA2 = ID words 60:61) * LBA28 sector addressing used from LBA 0 0H to 19746719 12D4F9FH. * LBA28 sector counts (transfer lengths) are 1 to 256. Def CHS: 16383.16.63 3FFF.10.3FH (ID words 1, 3 and 6) Total CHS: 16514064 FBFC10H (LBA1 = ID words 1*3*6) * CHS sector addressing used from LBA 0 0H to 16514063 FBFC0FH. * CHS sector counts (transfer lengths) are 1 to 256. Total LBA48: 0.0 0.0H (LBA3 = ID words 100:103) * This device does not support LBA48 sector addressing. Max Multiple: 16 (ATACT default) MW-DMA support: 07, modes 0 1 2 MW-DMA active: 00, mode U-DMA support: 07, modes 0 1 2 U-DMA active: 04, mode 2 * PCI U-DMA testing enabled for this device. * SMART enabled. ... done. Checking for SATA host controller... Did not find a supported SATA host controller. ...done. DEVICE 0: BEGIN SEQ=W PASS, COMMAND 0, Thu Sep 11 08:06:50 2003. ***** Debug level changed from 0 to 4. ATACT hourly report - Thu Sep 11 09:06:58 2003 ... Device 0... I/O counts: SectWr 6.9M SectRd 0.0M SectCmpr 0.0M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 147418 SMART status was OK. ATACT hourly report - Thu Sep 11 10:07:07 2003 ... Device 0... I/O counts: SectWr 13.9M SectRd 0.0M SectCmpr 0.0M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 323862 SMART status was OK. DEVICE 0: BEGIN SEQ=R PASS, COMMAND 499072, Thu Sep 11 10:57:23 2003. ATACT hourly report - Thu Sep 11 11:07:16 2003 ... Device 0... I/O counts: SectWr 19.7M SectRd 1.0M SectCmpr 1.0M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 500696 SMART status was OK. ATACT hourly report - Thu Sep 11 12:07:25 2003 ... Device 0... I/O counts: SectWr 19.7M SectRd 7.7M SectCmpr 7.7M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 669022 SMART status was OK. ATACT hourly report - Thu Sep 11 13:07:34 2003 ... Device 0... I/O counts: SectWr 19.7M SectRd 14.3M SectCmpr 14.3M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 837868 SMART status was OK. DEVICE 0: BEGIN NORMAL OPERATIONS, COMMAND 998256, Thu Sep 11 13:55:55 2003. ATACT hourly report - Thu Sep 11 14:07:45 2003 ... Device 0... I/O counts: SectWr 20.1M SectRd 20.7M SectCmpr 20.7M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 1019758 SMART status was OK. ATACT hourly report - Thu Sep 11 15:07:53 2003 ... Device 0... I/O counts: SectWr 22.0M SectRd 25.6M SectCmpr 25.6M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 1220897 SMART status was OK. ATACT hourly report - Thu Sep 11 16:07:57 2003 ... Device 0... I/O counts: SectWr 24.0M SectRd 30.4M SectCmpr 30.4M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 1417344 SMART status was OK. ATACT hourly report - Thu Sep 11 17:08:06 2003 ... Device 0... I/O counts: SectWr 25.9M SectRd 35.3M SectCmpr 35.3M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 1617053 SMART status was OK. ATACT hourly report - Thu Sep 11 18:08:14 2003 ... Device 0... I/O counts: SectWr 27.7M SectRd 40.2M SectCmpr 40.2M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 1815923 SMART status was OK. ATACT hourly report - Thu Sep 11 19:08:18 2003 ... Device 0... I/O counts: SectWr 29.7M SectRd 45.2M SectCmpr 45.2M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 2014356 SMART status was OK. ATACT hourly report - Thu Sep 11 20:08:23 2003 ... Device 0... I/O counts: SectWr 31.6M SectRd 50.1M SectCmpr 50.1M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 2218244 SMART status was OK. ATACT hourly report - Thu Sep 11 21:08:27 2003 ... Device 0... I/O counts: SectWr 33.4M SectRd 55.0M SectCmpr 55.0M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 2415449 SMART status was OK. ATACT hourly report - Thu Sep 11 22:08:30 2003 ... Device 0... I/O counts: SectWr 35.3M SectRd 59.8M SectCmpr 59.8M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 2616765 SMART status was OK. ATACT hourly report - Thu Sep 11 23:08:33 2003 ... Device 0... I/O counts: SectWr 37.2M SectRd 64.6M SectCmpr 64.6M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 2813610 SMART status was OK. ATACT hourly report - Fri Sep 12 00:08:41 2003 ... Device 0... I/O counts: SectWr 39.0M SectRd 69.4M SectCmpr 69.4M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 3015123 SMART status was OK. ATACT hourly report - Fri Sep 12 01:08:51 2003 ... Device 0... I/O counts: SectWr 40.9M SectRd 74.3M SectCmpr 74.3M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 3214293 SMART status was OK. ATACT hourly report - Fri Sep 12 02:08:54 2003 ... Device 0... I/O counts: SectWr 42.8M SectRd 79.1M SectCmpr 79.1M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 3415571 SMART status was OK. ATACT hourly report - Fri Sep 12 03:08:58 2003 ... Device 0... I/O counts: SectWr 44.7M SectRd 84.0M SectCmpr 84.0M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 3617146 SMART status was OK. ATACT hourly report - Fri Sep 12 04:09:04 2003 ... Device 0... I/O counts: SectWr 46.6M SectRd 89.0M SectCmpr 89.0M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 3819188 SMART status was OK. ATACT hourly report - Fri Sep 12 05:09:06 2003 ... Device 0... I/O counts: SectWr 48.5M SectRd 93.8M SectCmpr 93.8M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 4021544 SMART status was OK. ATACT hourly report - Fri Sep 12 06:09:14 2003 ... Device 0... I/O counts: SectWr 50.4M SectRd 98.8M SectCmpr 98.8M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 4223137 SMART status was OK. ATACT hourly report - Fri Sep 12 07:09:19 2003 ... Device 0... I/O counts: SectWr 52.2M SectRd 103.7M SectCmpr 103.7M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 4427778 SMART status was OK. ATACT hourly report - Fri Sep 12 08:09:22 2003 ... Device 0... I/O counts: SectWr 54.2M SectRd 108.8M SectCmpr 108.8M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 4634019 SMART status was OK. ATACT hourly report - Fri Sep 12 09:09:24 2003 ... Device 0... I/O counts: SectWr 56.1M SectRd 113.7M SectCmpr 113.7M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 4837975 SMART status was OK. ATACT hourly report - Fri Sep 12 10:09:27 2003 ... Device 0... I/O counts: SectWr 58.0M SectRd 118.6M SectCmpr 118.6M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 5038967 SMART status was OK. ATACT hourly report - Fri Sep 12 11:09:37 2003 ... Device 0... I/O counts: SectWr 59.9M SectRd 123.4M SectCmpr 123.4M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 5240498 SMART status was OK. ATACT hourly report - Fri Sep 12 12:09:39 2003 ... Device 0... I/O counts: SectWr 61.7M SectRd 128.3M SectCmpr 128.3M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 5437779 SMART status was OK. ATACT hourly report - Fri Sep 12 13:09:45 2003 ... Device 0... I/O counts: SectWr 63.6M SectRd 133.1M SectCmpr 133.1M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 5638207 SMART status was OK. ATACT hourly report - Fri Sep 12 14:09:46 2003 ... Device 0... I/O counts: SectWr 65.5M SectRd 138.0M SectCmpr 138.0M Error counts: DC 0 TO 0 UC 0 OE 0 Total 0 At command 5840602 SMART status was OK. ATACT TERMINATED DUE TO ESC KEY ! ATACT Command Summary... Command Dev 0 Dev 0 Dev 1 Dev 1 Command Code Count Errors Count Errors Name 10 25453 0 0 0 RECALIBRATE 20 833729 0 0 0 READ SECTORS 30 587838 0 0 0 WRITE SECTORS 40 51356 0 0 0 READ VERIFY SECTORS 70 25470 0 0 0 SEEK 90 25643 0 0 0 EXECUTE DEVICE DIAGNOSTIC 91 76695 0 0 0 INITIALIZE DEVICE PARAMETERS B0 186 0 0 0 SMART C4 1461278 0 0 0 READ MULTIPLE C5 586477 0 0 0 WRITE MULTIPLE C6 76861 0 0 0 SET MULTIPLE MODE C8 1473034 0 0 0 READ DMA CA 590513 0 0 0 WRITE DMA E4 25630 0 0 0 READ BUFFER E7 51360 0 0 0 FLUSH CACHE E8 51004 0 0 0 WRITE BUFFER EC 25625 0 0 0 IDENTIFY DEVICE EF 25590 0 0 0 SET FEATURES SR 25590 0 0 0 SOFT RESET Totals 6019332 0 0 0 ATACT Device 0 Sectors Written/Read/Compared Summary... Total sectors written: 67160390 (67.1M) Total sectors read: 142198077 (142.1M) Total sectors compared: 142198077 (142.1M) At command 6009285 SMART status was OK. ATACT Error Summary... Error Dev 0 Dev 1 Error Type Errors Errors Name DC 0 0 DATA COMPARE ERRORS TO 0 0 TIMEOUT ERRORS OE 0 0 OTHER ERRORS Totals 0 0 ATACT run time was 30 hours 55 minutes. ATACT Ended -- Fri Sep 12 15:02:40 2003 ############################################################